Ask Danny | Ep. 16: Top 5 Simple Solutions for Bathroom Maintenance

This week, Today’s Homeowner Radio Exhibit co-host Joe Truini offers his Top rated 5 Simple Methods for the rest room.

“Today’s Homeowner” Simple Solution host Joe Truini sprays Rain-X on his shower door to remove unsightly water spots.
A glass cleaner that has rain repellant will stop drinking water spots from showing up on shower doors. (3 Echoes Information Studio)

H2o Location Remover for Shower Doors

Does your glass shower doorway have water spots? They’re a pain to take away, and general cleaners merely just can’t do the work. Well, here’s a mystery water place remover that you may currently have devoid of knowing it!

No one desires to wipe their shower doorway each individual time following they use it to prevent drinking water places. And let’s be straightforward — who has the time for that?

That is why it helps to have the proper resource for frequent maintenance.

I like to use a glass cleaner with a method that has rain repellant — like this just one. (This is an affiliate connection. If you buy this item, we will make a small commission at no additional expense to you.)

This sort of merchandise is typically advertised for cleansing bugs and eliminating water places from vehicle or truck windshields, but that doesn’t imply it only functions on these surfaces! So appear in the automotive aisle if you just can’t locate the product or service in close proximity to typical cleaners.

Now, why does this product or service function about basic residence cleaners?

It’s due to the fact the rain-repellant formula brings about drinking water to bead up and repel off the shower door. That usually means your glass shower enclosure will have no h2o places!

Here’s how it operates: Simply spray the cleaner on the glass and use a towel to wipe it off — I usually use a cotton microfiber towel.

Now you have an effortless drinking water place remover! Not only is the glass clean, but it also repels h2o with no spotting.

Check out: Easy H2o Place Remover for Your Shower Door

Box of baking soda and bottle of white vinegar, seen beside a bathroom sink
Baking soda and vinegar will deodorize and clear your sink with out harmful the bathtub fixture. (3 Echoes Content material Studio)

How to Clean and Deodorize Tub Sink

It’s not normally you provide baking soda and vinegar into a toilet, but you can use them to cleanse and deodorize a rest room sink.

Sinks generally become gradual-draining, and they can get clogged up with cleaning soap scum and hair. They will also produce a rather funky odor, so here’s how to get rid of that.

Begin with just one-3rd cup of baking soda. You don’t have to be way too precise, but you will need to have to choose about a third of a cup or so and dump it in the drain.

Following, choose a single entire cup of vinegar. White vinegar is a actually sturdy cleaning agent that you can use all in excess of the home.

After it hits the baking soda, allow it fizz down for a few minutes. Some people could use bleach listed here, but bleach can actually try to eat the finish proper off of some bathtub fixtures, so you don’t want to use it.

Soon after the baking soda and vinegar have calmed down a tiny little bit, observe up with a total kettle of warm h2o. This will, in blend with the vinegar and the baking soda, minimize as a result of anything at all that could possibly be clogging up the sink.

If you do this cure at the time a thirty day period, you will have a truly sweet-smelling sink and a cost-free-flowing drain.

Enjoy: The Simple Way to Thoroughly clean and Deodorize Your Sink

inside of a toilet tank showing flapper valve
Flappers have two vital careers: They deliver a seal for the toilet’s flush valve and control the quantity of water produced into the bowl. (3 Echoes Content material Studio)

How to Replace a Bathroom Flapper Valve

If you have a bathroom that is constantly operating, the offender is probable a leaky flapper valve. Over time, flapper valves may well grow to be cracked or warped, which can allow for drinking water to leak out.

Here’s how to swap it:

  • Flip the drinking water off to your bathroom.
  • Flush the h2o out so the tank is empty
  • Unhook the outdated flapper valve and snap on the new one particular.
  • Adjust the chain to make absolutely sure the duration is correct.
  • Transform the water back on and flush the bathroom a few of occasions to make certain the flapper valve is functioning adequately.

Look at: How to Switch Toilet Flapper Valve

A home made scrub brush drill attachment chucked into a drill is excellent for detailing tile flooring. (3 Echoes Information Studio)

How to Power-Thoroughly clean Tub Tiles

Scrub brushes operate properly for cleaning, but they call for a lot of elbow grease. To change a normal hand scrub brush into a power attachment for your drill:

  1. Lower the handle off a spherical scrub brush.
  2. Drill a hole in the middle of the brush.
  3. Insert a 4-inch lengthy equipment bolt in the hole from the bristle aspect.
  4. Place a washer and nut on the back again aspect and tighten it up.
  5. Chuck the bolt into a drill.
  6. Run the drill at medium speed when using the scrub brush attachment.

View: How to Cleanse Tiles More quickly Than At any time

Using vinegar to clean a clogged showerhead.
Use vinegar and a plastic bag to clean a clogged showerhead. (3 Echoes Material Studio)

How to Clean a Clogged Showerhead

Showerhead spray nozzles can grow to be clogged above time with mineral deposits uncovered in tap h2o.

To clean up a showerhead so it sprays uniformly:

  • Spot a plastic bag crammed with white distilled vinegar above the showerhead.
  • Connect a twist tie about the showerhead arm to hold the bag in area.
  • Let the showerhead to soak in the vinegar for a person to two times.
  • Eliminate the bag and flip the showerhead on full pressure.

If the nozzles are continue to clogged, repeat the soaking process until obvious.

Look at: How to Clean a Clogged Showerhead

More Looking through

Leave a Reply